ZyXEL Communications omni.net Plus - Manual (Page 166)

Technical Reference for ZyXEL omni.net series
B-14
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
32 20 Bundle connection is enabled in answer mode only.
64 40 Bundle connection is enabled in call mode only.
96 60 Bundle connection is enabled in both directions.
S89= bit dec hex Bundle and data encryption control.
5 0 0 Disable the metering pulse of POTS port 2.
32 32 Enable the metering pulse of POTS port 2.
6 0 0 Disable the metering pulse of POTS port 1.
64 40 Enable the metering pulse of POTS port 1.
S100= dec hex B-channel bundling protocol selection
0 0 (*) Multiple Link Protocol (MLP)
S102= Outgoing ISDN data type.
Value has the same definition as S82.
Bnn
S104+n= dec hex Outgoing Service Indicator (for 1TR6 only),
n=0, POTs port, Phone 2
n=2, ISDN data
n=3, POTS port, Phone 1
1 1 Fernsprechen
2 2 a/b - Dienste
7 7 Daten bertragung 64 Kbps. The defaults are :
* s104=1 - for POTS port 2
* s105= - reserved
* s106=7 - for ISDN data
* s107=1 - for POTS port 1
S108+n= dec hex Outgoing Service Additional (for 1TR6 only) Information.
n=1, POTS port, Phone 2
n=2, ISDN data
n=3, POTS port, Phone 1
SI=1 1 1 (*) ISDN-Fernsprechen 3.1 kHz
2 2 Fernsprechen analog