ZyXEL Communications omni.net Plus - Manual (Page 160)

Technical Reference for ZyXEL omni.net series
B-8
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
S23= bit dec hex Bit mapped register +105
0 0 0 Command echo disabled. E0
1 1 Command echo enabled. E1
2 0 0 Insertion is not allowed during a phone call.
4 4 Insertion is allowed during a phone call.
3-5 0 0 ATX0 (See result code table).
8 8 ATX1 dec hex AT
16 10 ATX2 40 28 X5
24 18 ATX3 48 30 X6
32 20 ATX4 56 38 X7
6 0 0 Display result code in numeric format (see S35b7). V0
64 40 Display result code in verbose format. V1
7 0 0 omni.net returns result code. Q0
128 80 omni.net does not return result code (see S40b1). Q1
S24= bit dec hex Bit mapped register +34
2 0 0 Ignore the setting of S21(b1-2) when Phone 1 keypad-dial.
1 1 The setting of S21(b1-2) will be affected to Phone 1
keypad-dial.
3 0 0 Ignore the setting of S21(b1-2) when Phone 2 keypad-dial.
1 1 The setting of S21(b1-2) will be affected to Phone 2
keypad-dial.
6 0 0 POTS Port tone volume low.
1 1 POTS Port tone volume high.
S27= bit dec hex Bit mapped register +156
0-2 Modem data compress (for omni.net LCD+M only)
3-5 0 0 DTE port Flow Control disabled. &H0
24 18 DTE port Hardware (RTS/CTS) flow control. &H3
40 28 Reserved. &H5