ZyXEL Communications omni.net Plus - Manual (Page 140)

Technical Reference for ZyXEL omni.net series
A-6
All the Following Commands Require a 'AT' Prefix
AT Com. Options Function & Description Reference
CSn n=0-3
(0 *)
Suspend a call, 'n' is the call identifier (DSS1).
CT Clear buffer and start the embedded protocol analyzer. Capture data
immediately and start timer.
C$ Invoke the interpretation function of the embedded protocol analyzer
and display the results on DTE.
Ds Dial 's' (numbers and options) that follows (see also S38b0, S35b4).
The options for 's' are listed as follows:
, Pause for a time specified in S8. Remaining digits will be dialed as
in-band DTMF.
Y0 (*) Unknown type of number
Y1 International number
Y2 National number
Y3 Network specific number
Y4 Subscriber number
Y6 Abbreviated number
Z0 (*) Type of sub-address - NSAP with AFI=$50,
IA5 characters
Z2 Type of sub-address - user specified, IA5 characters
N0 (*) Unknown numbering plan
N1 ISDN/Telephony numbering plan (CCITT E.164/E.163)
N3 Data numbering plan (CCITT X.121)
N8 National standard numbering plan
N9 Private numbering plan
/ Called party sub-address delimiters
The format of 's' is:
[[Yn][Nn]called_party_number][[W][,]]inband_dtmf_number
or
[[Yn][Nn]called_party_number][/[Zn]called_party_subaddress/]
DAs Dial 's' (number and options) that follows for the POTS port, Phone
1.
DBs Dial 's' (number and options) that follows for the POTS port, Phone
2.