ZyXEL Communications omni.net Plus - Manual (Page 127)

Technical Reference for ZyXEL omni.net series
10-7
commands are summarized as follows:
EPA-Analyze AT Commands Description
ATCT Clears buffer and starts the embedded protocol analyzer. Captures data
immediately and starts the timer.
ATC$ Invokes the interpretation function of the embedded protocol analyzer and
displays the results on the DTE screen.
Table 65. EPA-Analyze AT Commands
The analyzed results can be viewed as if in a full screen editor. Several number keys are used to
control the display. For PC users, it is convenient to use the keys on the numeric keypad (make sure
that Num-Lock is on.).
The display control key functions are detailed in the following table:
Control Key Function Description
1 End Display to the end of buffer.
2 Cursor Down Scroll one line up.
3 Page Down Display the next page.
7 Home Display the first page.
8 Cursor Up Scroll one line down.
9 Page Up Display the previous page.
Q, q Quit Quit embedded protocol analyzer.
Table 66. display control key functions