ZyXEL Communications omni.net Plus - Manual (Page 27)

Technical Reference for ZyXEL omni.net series
2-1
Chapter 2
Using ZyXEL
®
ISDN Configuration Manager
This chapter shows you how to use the ZyXEL ISDN Configuration Manager (ICM).
About ZyXEL ISDN Configuration Manager
The ZyXEL ISDN Configuration Manager is a Graphical User Interface (GUI) program that runs
on Windows 95/98/NT operating systems. You can control and set up your ZyXEL omni.net ISDN
TA either by using a traditional terminal program where you need to program AT commands, or by
running this user friendly ZyXEL ISDN Configuration Manager.
Before starting the ZyXEL ISDN Configuration Manager, you have to:
1. Verify that the power supply to your ZyXEL omni.net LCD/LCD+M/Plus/D is plugged in to a
wall power outlet.
2. Make sure that your ZyXEL omni.net LCD/LCD+M/Plus/D is connected to your computer's
serial port (COM1 to COM4).
3. Close all communications programs and any DOS Prompts still active in your computer
system.
4. Turn on your ZyXEL omni.net LCD/LCD+M/Plus/D.