ZyXEL Communications omni.net Plus - Manual (Page 72)

Technical Reference for ZyXEL omni.net series
6-2
Flash Key Commands
Feature Phone
operation Flash Key
Commands Description
Hold/Release/Cancel Press the Flash
key 1. Put caller on hold.
2. Resume with caller presently on hold.
Cancel the second dial connection attempt.
Call Waiting
Press the Flash
key and 0
1. Answer the incoming call and place the existing call on hold.
2. Switch back and forth between the two calls; either two
remote calls or one remote call and one local call.
3. Put a call on hold to place a second call.
InterCom
Press the Flash
key and 2
1. Dial to another local phone.
2. Transfer the call to another local phone.
Three-Way
Conference Press the Flash
key and 3
Create three-way conference connection in Mixing mode
(1 remote party and 2 local parties or 2 remote parties and 1
local party.)
Call Reject
Press the Flash
key and 5
1. Reject the second incoming call.
2. Disconnect the current phone connection.
Last Number Redial
Press the Flash
key and * * Allows you to redial the last number called on POTS port
Phone 1 and 2.
Press the Flash
key and * nn *
phone-number # To record a phone number for quick dial.
(Note: nn=00-09, stored phone number index)
Press the Flash
key and * nn * # To clear a quick dial number Quick Dial
Press the Flash
key and * nn # To dial a stored phone number quickly
Table 33. Flash Key Commands
InterCom
Your omni.net can work as an InterCom by connecting two phones to Phone 1 and Phone 2 analog
ports at the rear panel of your omni.net.