ZyXEL Communications XGS-4526 - Manual (Page 62)

Chapter 5 Initial Setup Example
XGS-4526 User’s Guide
62
5.1.5 Enabling RIP
To exchange routing information with other routing devices across different
routing domains, enable RIP (Routing Information Protocol) in the RIP screen.
1
Click IP Application and RIP in the navigation panel.
2
Select Both in the Direction
field to set the Switch to
broadcast and receive routing
information.
3
In the Version field, select
RIP-1 for the RIP packet
format that is universally
supported.
4
Click Apply to save your changes back to the run-time memory. Settings in the
run-time memory are lost when the Switch’s power is turned off.
EXAMPLE