ZyXEL Communications XGS-4526 - Manual (Page 296)

Chapter 32 OSPF
XGS-4526 User’s Guide
296
32.7 OSPF Virtual-Links
Configure and view virtual link settings in this screen. See Section 32.1 on page
285 for more information on OSPF.
In the OSPF Configuration screen, click Virtual-Link to display the screen as
shown next.
Figure 153 IP Application > OSPF Configuration > OSPF Virtual Link
The following table describes the related labels in this screen.
Key ID When the Authentication field displays MD5, this field displays the
identification number of the key used.
Cost This field displays the interface cost used for calculating the routing table.
Priority This field displays the priority for this OSPF interface.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to begin configuring this screen afresh.
Table 102 IP Application > OSPF Configuration > OSPF Interface (continued)
LABEL DESCRIPTION
Table 103 IP Application > OSPF Configuration > OSPF Virtual Link
LABEL DESCRIPTION
Name Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.
Area ID Select the area ID (in an IP address format with dotted decimal notation)
of an area to associate the interface to that area.
Peer Router
ID Enter the ID of a peer border router.