ZyXEL Communications XGS-4526 - Manual (Page 321)

Chapter 36 DHCP
XGS-4526 User’s Guide
321
36.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the
VLAN link In the DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See Section 8.6 on page 87 for
information on how to do this.
Figure 176 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 115 IP Application > DHCP > VLAN
LABEL DESCRIPTION
VID Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status Select whether the Switch should function as a DHCP Server or Relay for
the specified VID. If you select Server then fields related to DHCP relay
configuration are grayed out and vice versa.