Xerox 450c - Manual (Page 98)

98
Always send from memory
Scans the document and stores it to memory until
the fax is sent. This lets you remove your document
from the WorkCentre once it’s scanned.
If memory fills
When sending a fax at a later time or to more than
one fax number, instructs the WorkCentre to either
continue fax job or end fax job if there is not
enough memory to store the entire document. If you
choose continue fax job, the document remains in
the document tray and is sent as memory becomes
available.
5. Do one of the following:
• Click OK to change the options at the WorkCentre
and close the WorkCentre 450c Settings window.
• Click Apply to change the options at the
WorkCentre and keep the WorkCentre 450c Settings
window open.
Note To use the factory defaults, click the Restore
Defaults button.