Xerox 450c - Manual (Page 236)

236
Solving scanning problems
Problem Solution
When I press the SCAN
key, nothing happens. Do one or more of the following:
1. Check that your parallel cable
connects the WorkCentre to
your PC.
2. Make sure a scanning
application is installed on your
PC and you entered its location
in the ControlCentre Properties
dialog box.
3. Make sure the WorkCentre fed
the first page of your document
into the scanner.
4. In the WorkCentre 450c Status
window, click the Test button.
Follow the instructions on your
screen to test scanning from the
WorkCentre to your PC.