Xerox 450c - Manual (Page 82)

82
Using a confidential charge code
when sending a fax
Depending on your telephone system, you might need to
use a charge code when sending a fax to a number outside
your local area. A charge code could be your calling card
number or some other number your long-distance service
provides. To keep the charge code confidential, the
WorkCentre does not display the code on the control panel
LCD or print the code on any reports.
Note If you frequently send faxes to a fax number that
requires a charge code, you can create an individual
speed dial entry in your Phonebook that includes your
charge code. Using speed dialing, you can quickly
enter both the fax number and charge code with the
press of one key.
1. At the WorkCentre 450c, press the MENU key.
2. Press 5 [Setup] and ENTER .
3. Press 7 [Control panel] and ENTER .
4. Press 4 [Pause key] and ENTER .