Xerox 450c - Manual (Page 259)

259
E023 A line of data could not be
decoded within the
prescribed time, or there is
a transmission speed
mismatch (receive errors). Check the WorkCentre with
a known good machine.
E024 The WorkCentre timed out
while receiving a fax
because it did not receive a
command from the remote
machine within the
required time frame. Call the remote location and
have the fax resent, or
retrieve the document from
the remote machine (poll
in).
E025 The remote machine
cannot do what you are
requesting from the
WorkCentre.
Communications are
terminated due to poor line
conditions resulting in too
many errors. Check the WorkCentre with
a known good machine.
E026 The WorkCentre did not
receive a post message
response from the remote
machine after three
attempts. The WorkCentre
used all of its retry
attempts. Check the WorkCentre with
a known good machine.
Code Meaning Action