Xerox 450c - Manual (Page 240)

240
Change ink:
CARTRIDGE
key. Check
prints.
The WorkCentre ran out of
ink while printing an
incoming fax. The last page
printed and any following
pages are stored to
memory, provided there is
enough memory. Install a new ink cartridge.
After installing the
cartridge, press
START
to
print the pages stored to
memory.
Close printer
cover. The printer cover is open. Close the printer cover.
Color head low.
START
if OK, or
CARTRIDGE
.
You may need to replace
the color print head. Check your printed pages.
If the print quality is good,
press
START
to clear the
message and continue
using the print head. If the
quality is poor, replace the
color print head.
Cyan low.
START
if
OK, or
CARTRIDGE
.
The ink supply in the cyan
ink cartridge is low. Check the printed pages. If
the print quality is good,
press
START
to clear the
message and continue
using the cartridge. If the
print quality is not good,
replace the cyan ink
cartridge.
Message Meaning Action