Xerox 450c - Manual (Page 77)

77
3. To print a confirmation report after the fax is sent,
press the CONFIRM key to display [yes] and then
press ENTER .
4. Press the CONTRAST key several times to switch
among these options:
When you choose a photo setting, the WorkCentre
automatically sets the resolution to fine if it was
previously set to standard.
5. Press the RESOLUTION key several times to switch
among these options:
Normal For documents with good dark and light values.
Lighten For documents that are too dark.
Darken For documents that are too light.
Photo normal For photographs and documents that contain
different shades of gray.
Photo lighten For photographs and grayscale documents
that are too dark.
Photo darken For photographs and grayscale documents
that are too light.
Standard 200 x 100 dots per inch.
Fine 200 x 200 dots per inch.
Superfine 300 x 300 dots per inch.