Xerox 450c - Manual (Page 256)

256
E006 An internal error occurred at
the WorkCentre. You may
have tried to send a
document, but it was not
found in memory, or the
data needed to send a
document could not be
found Retry the operation.
E007 An internal error occurred at
the WorkCentre. No action.
E008 The remote machine did not
respond after the
WorkCentre’s three
attempts to confirm the
remote machine’s ability to
receive the fax. The
telephone line could be
noisy. Retry the operation. If
unsuccessful, test with a
known good machine.
E009 There is a transmission
speed mismatch between
the WorkCentre and the
remote machine, which can
be caused by a noisy phone
line. The two machines will
try different transmission
speeds. If this is a consistent
problem when sending a
fax to the remote machine,
always send the fax at
slower speed or at a later
time.
E010 The WorkCentre timed out
when it received a (PRI)
signal (T3 timeout). Check the WorkCentre with
a known good machine.
Code Meaning Action