Xerox 450c - Manual (Page 158)

158
4. Change the defaults for any of these options:
Include receive header
Prints the date and time the fax is received, the
number sending the fax, your fax name (if specified)
or your fax number, and the page number at the top
of each page received.
Receive
Specifies how the WorkCentre receives the fax,
either To print or To memory. If you choose to
receive your faxes to memory, you’ll need to print
them as soon as possible to free up memory.
Note To receive faxes to memory, you must click
Enable security on the Setup/Comm property page.
See “Enabling security” later in this chapter.
If cannot print
Instructs the WorkCentre to either receive to
memory or do not answer when it’s unable to print.
For example, the WorkCentre could be out of paper
or ink.