Installing a high capacity (black only) ink jet ca – Xerox 450c User Manual

Page 49

Text mode
Original mode

Installing a high capacity (black only) ink jet
cartridge

The WorkCentre 450c Status window on your PC includes
an ink level gauge which indicates your ink supply. When
the ink supply runs low, the WorkCentre displays a
message in the WorkCentre 450c Status window and on the
control panel LCD. If your print quality is good, press the
START key on the control panel and continue using the ink
jet cartridge.
If you need to replace the high capacity ink jet cartridge,
use the following procedure. You can also use the
procedure to install an ink jet cartridge for the first time,
and to reinstall a previously used ink jet cartridge when
changing from color to black-and-white printing.

Note If you run out of ink while printing faxes or
documents stored to memory, any pages printed
before you change the ink cartridge are lost.

1. At the WorkCentre 450c, press the CARTRIDGE key

to display [change] on the LCD.