Xerox 450c - Manual (Page 125)

125
Receiving a fax to memory
To keep your faxes confidential, you can receive them to
memory. However, you should print the faxes as soon as
possible to free up memory so you can continue receiving
faxes. The following section “Printing a fax stored to
memory” explains how to print stored faxes.
The WorkCentre notifies you when memory is full by
displaying a message on the control panel LCD or printing
a Memory Full report.
1. At your PC, double-click the WorkCentre icon.
2. In the WorkCentre 450c Status window, click Settings.
3. Click the Setup/Comm tab.
4. Click Enable security and then click the Apply button.
5. In the Set Security Password dialog box, type a four-
digit password in the Password box and click OK.
Type a f our-digit
pass word