Xerox 450c - Manual (Page 162)

162
Note Record the password used, as you will need to
enter it to use secure features.
7. Click OK.
If you want to change your password, click Enable
security on the Setup/Comm property page to remove
the check mark and click Apply. Click Enable
security, click OK, and then type a new password in
the Set Security Password dialog box.
Changing fax quality
The WorkCentre is set to print incoming faxes at fast speed.
You can change the fax speed to print faxes at a slower
speed with higher quality results.
1. At the WorkCentre 450c, press the
MENU key.
2. Press 6 [Printer] and ENTER .
3. Press 3 [Fax/copy quality] and ENTER .
4. Press RIGHT ARROW to display [normal] and
ENTER . The WorkCentre sounds a confirmation
beep.
5. Press STOP to exit the menus.