Xerox 450c User Manual

Page 75

Text mode
Original mode

2. Do one of the following:

• Using the numeric keypad, enter the fax number.
• To change the fax number, press the

LEFT

ARROW

key to move the cursor to the left, press

the

RIGHT ARROW

key to move the cursor to the

right, and press the

EXIT/CLEAR

key to delete a

highlighted number.

• Press

SPEED DIAL

and enter the speed dial

number.

Note Depending on your phone system, you may
need to enter a prefix (for example, 8 or 9) and press
the PAUSE key to add a timed interval before entering
the fax number.

3. Press

START

The WorkCentre dials the fax number, sends the fax, and
sounds a confirmation beep when the transmission is
complete. By default, the WorkCentre prints a report if the
fax could not be sent.
To cancel the transmission before the WorkCentre sends
the fax, press the

STOP

key and then the

ENTER

key.