Xerox 450c - Manual (Page 86)

86
7. Load up to 20 pages face down in the document tray.
8. Begin dialing the fax number.
9. When you need to switch to touch-tone dialing, press
the PAUSE key to display the dial options.
10. Press the RIGHT ARROW key twice to display [tone
dialing] and then press ENTER . The letter “T”
displays on the LCD, which indicates that the next
number you enter will use touch-tone dialing.
11. Enter the next fax number.
12. Do one of the following:
• Press START to begin the fax transmission.
• Press ENTER , add another fax number, and then
press START .
Note After the fax is sent, you may want to change
the PAUSE key setting to pause only. Repeat steps
1 through 5 and choose pause only in step 5.