Zebra Technologies Z4Mplus - Manual (Page 80)

Configuration
Print a Network Configuration Label 72
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
connected to the network.
To print a network configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT .
2. Press NEXT or PREVIOUS to scroll through the parameters until you reach
LIST NETWORK
.
3. Press the right oval to confirm printing.
A network configuration label prints ( Figure 28 ). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 28 • Network Configuration Label (With a Wireless Print Server Installed)