Zebra Technologies Z4Mplus - Manual (Page 100)

Configuration
Control Panel LCD Displays 92
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
Adjust Label Top Position
This parameter adjusts the print position vertically on the label. Positive
numbers adjust the label top position farther down the label (away from the
printhead); negative numbers adjust the position up the label (toward the
printhead). The displayed value represents dots.
Default: +000
Range: –120 to +120 dots
To change the value shown:
1. Press SELECT to select the parameter.
2. Press PLUS (+) to increase the value.
3. Press MINUS (-) to decrease the value.
4. Press SELECT to accept any changes and deselect the parameter.
Adjust Left Position
This parameter establishes how far from the left edge of a label the format
begins to print by adjusting horizontal positioning on the label. Positive
numbers adjust the printing away from the main frame by the number of
dots selected; negative numbers shift printing toward the main frame. The
displayed value represents dots.
Default: 0000
Range: –9999 to +9999 dots
To change the value shown:
1. Press SELECT to select the parameter.
2. Press MINUS (-) to move the cursor.
3. Press PLUS (+) to change between +/- and to increase the value of the
digit.
4. For a negative value, enter the value before changing to the minus sign.
5. Press SELECT to accept any changes and deselect the parameter.
Table 9 • Printer Parameters (Page 20 of 23)
Parameter Action/Explanation
LABEL TOP +000
- +
LEFT POSITION
- ±0000 +