Zebra Technologies Z4Mplus - Manual (Page 18)

Introduction
Control Panel 10
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
Control Panel Buttons
Table 1 • Control Panel Buttons
Button Function
FEED Forces the printer to feed one blank label each time the button is pressed.
• Printer not printing: one blank label immediately feeds.
• Printing: one blank label feeds after the current batch of labels is complete.
PAUSE Starts and stops the printing process.
• Printer not printing: no printing occurs. (Press PAUSE again to resume printing.)
• Printing: printing stops after the current label is complete.
CANCEL Cancels print jobs when in the pause mode.
• Printer not printing: the next stored label format does not print.
• Printing: current label completes printing, and the next label format is cancelled.
Press and hold for several seconds to cancel all print jobs in memory.
SETUP/EXIT Enters and exits the configuration mode.
SELECT Toggles the function of PLUS (+) and MINUS (–) between the Scroll and Change
Modes.
• Press once to use PLUS (+) and MINUS (–) to change the values of the selection.
• Press again to use PLUS (+) and MINUS (–) to scroll through the menu items.
PLUS ( + )
(scroll mode)
Scrolls to the next selection.
PLUS ( + )
(change mode)
• Increases the value.
• Answers yes.
• Prints a label (when applicable).
MINUS ( – )
(scroll mode)
Scrolls to the previous selection.
MINUS ( – )
(change mode)
• Decreases the value.
• Selects the digit you wish to change.
• Answers no.