Zebra Technologies Z4Mplus - Manual (Page 32)

Printer Setup
Types of Media 24
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
Non-Continuous
Fanfold Media Fanfold media is folded in a zigzag pattern. Fanfold
media can have the same label divisions as non-
continuous roll media. The divisions would fall on or
near the folds.
Continuous
Roll Media Continuous media is wound on a core and is without
gaps, holes, notches, or black marks. This allows the
image to be printed anywhere on the label. With
continuous media, use the transmissive sensor so the
printer can detect when the media runs out.
RFID “Smart”
Media
(for use only with
printers that have
an RFID
reader/encoder
installed)
Radio frequency identification (RFID) “smart” labels
are made from the same materials and adhesives as
non-RFID labels. Each label has an RFID
transponder, made of a chip and an antenna,
embedded between the label and the liner (sometimes
called an “inlay”). The shape of the transponder
varies by manufacturer and is visible through the
label.
All “smart” labels have memory that can be read, and
many have memory that can be encoded.
Important • Transponder placement within a
label depends on the transponder type and the
printer model. Make sure that you are using
the correct “smart” media for your printer.
Table 4 • Types of Media (Continued)
Media Type How It Looks Description