Zebra Technologies Z4Mplus - Manual (Page 113)

105 Routine Maintenance
Cleaning Procedures
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
Clean the Media Compartment and Sensors
To clean the media compartment and sensors, complete these steps:
1. Brush or vacuum any accumulated paper lint and dust away from the media and ribbon
paths.
2. Brush or vacuum any paper lint and dust away from the sensors (see Figure 33 ).
Figure 33 • Cleaning the Sensors
1
Take-label sensor
2
Ribbon sensor
3
Transmissive sensor
4
Reflective sensor
1
3
4
2