ZyXEL Communications 202H - Manual (Page 70)

Prestige 202H User’s Guide
7-2 Internet Access Setup
7.2 Internet Access Setup
The table following this menu contains instructions on how to configure your router for Internet access.
Figure 7-1 Menu 4 Internet Access Setup
Table 7-2 Menu 4 Internet Access Setup
FIELD DESCRIPTION
ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is for
identification purposes only.
Pri Phone and Sec
Phone # Both the Primary and the Secondary Phone number refer to the number that the
router dials to connect to the ISP.
My Login Enter the login name given to you by your ISP.
My Password Enter the password associated with the login name above.
My WAN IP Addr Some implementations, especially the UNIX derivatives, require the WAN link to
have a separate IP network number from the LAN and each end must have a unique
address within the WAN network number. If this is the case, enter the IP address
assigned to the WAN port of your router.
NOTE: This is the address assigned to your local router WAN, not the remote router.
If the remote router is a router, then this entry determines the local router Rem IP
Addr in Menu 11.1.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Pri Phone #= 1234
Sec Phone #=
My Login= ChangeMe
My Password= ********
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 100
Press ENTER to Confirm or ESC to Cancel:
Enter login name
and password.
Enter the phone
number of your ISP.