ZyXEL Communications 202H User Manual
Page 223
Prestige 202H User’s Guide
System Information and Diagnosis
20-13
Table 20-4 System Maintenance Menu Diagnostic
FIELD
DESCRIPTION
Internet Setup Test
This test checks to see if your Internet access configuration has been done
correctly. When this option is chosen, the Prestige places a manual call to the
ISP remote node. If everything is working properly, you will receive an
appropriate response. Otherwise, note the error message and consult your
network administrator.
Ping Host
This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.
Reboot System
This option reboots the Prestige.
Command Mode
This option allows you to enter the command mode. It allows you to diagnose
and test your Prestige using a specified set of commands.
Manual Call Remote
Node
If you entered 5 above, then enter the remote node number (with reference to
the remote node listing on Menu 11 – Remote Node Setup) you wish to call.
Host IP Address
If you entered 12 above, then enter the IP address of the machine you want
to ping in this field.
The following figure shows an example of a successful connection after selecting option Manual Call in
Menu 24.4.
Figure 20-12 Display for a Successful Manual Call
Start dialing for node <1>
### Hit any key to continue. ###
Dialing chan<2> phone
Call CONNECT speed<64000> chan<2> prot<1>
LCP up
CHAP send response
CHAP login to remote OK!
IPCP negotiation started
IPCP up