ZyXEL Communications 202H - Manual (Page 234)

Prestige 202H User’s Guide
21-10 Firmware and Configuration File Maintenance
Figure 21-11 Restore Configuration Example
Step 4. After a successful restoration you will see the following screen. Press any key to restart the
Prestige and return to the SMT menu.
Figure 21-12 Successful Restoration Confirmation Screen
21.4 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 - System Maintenance - Upload System Configuration File (for console port).
WARNING!
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY
PERMANENTLY DAMAGE YOUR PRESTIGE, WHEN THE UPLOAD
CONFIGURATION/FIRMWARE PROCESS IS COMPLETE, THE PRESTIGE WILL
AUTOMATICALLY RESET.
21.4.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the Prestige, type 7 in menu 24. You will see Menu 24.7 – System Maintenance –
Upload Firmware as shown.
Save to ROM
Hit any key to start system reboot.
Type the configuration file’s
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.