ZyXEL Communications 202H - Manual (Page 251)

Prestige 202H User’s Guide
Call Scheduling 23-1
Chapter 23
Call Scheduling
Call scheduling allows you to dictate when a remote node should be called and for how long.
23.1 Call Scheduling Overview
The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a videocassette recorder (you
can specify a time period for the VCR to record).
23.2 Configuring Call Scheduling
From the main menu, enter 26 to access Menu 26 - Schedule Setup as shown next. You can apply up to 4
schedule sets in Menu 11.1 - Remote Node Profile.
Figure 23-1 Menu 26 Schedule Setup
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2, 3 and 4 are applied in the remote node, then set 1 will take precedence over set 2, 3 and
4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3 and
4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Menu 26 - Schedule Setup
Schedule
Set #
------
1
2
3
4
5
6
Name
------------------
______________
______________
______________
______________
______________
______________
Schedule
Set #
------
7
8
9
10
11
12
Name
------------------
______________
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure=0
Edit Name=N/A
Press ENTER to Confirm or ESC to Cancel: