ZyXEL Communications 202H - Manual (Page 61)

Prestige 202H User’s Guide
Ethernet Setup 6-1
Chapter 6
Ethernet Setup
This chapter shows you how to configure the LAN settings for your Prestige.
6.1 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main Menu,
enter 3 to open Menu 3 - Ethernet Setup.
Figure 6-1 Menu 3 Ethernet Setup
6.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need
to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and
prevent security breaches.
Figure 6-2 Menu 3.1 General Ethernet Setup
If you need to define filters, please read the Filter Configuration chapter first, then return to this menu to
define the filter sets.
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: