ZyXEL Communications 202H - Manual (Page 44)

Prestige 202H User’s Guide
3-4 Introducing the SMT
Table 3-2 Main Menu Summary
NO. Menu Title FUNCTION
3 Ethernet Setup Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port (not available on all models).
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
11 Remote Node Setup Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12 Static Routing Setup Configure IP static routes in this menu.
13 Default Dial-in Setup Use this menu to set up default dial-in parameters so that your router can
be used as a dial-in server.
14 Dial-in User Setup Use this menu to configure settings for remote dial-in users.
15 NAT Setup Use this menu to configure Network Address Translation.
21 Filter Set Configuration Use this menu to setup filters to provide security, call control, etc.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.
23 System Security Use this menu to set up security-related parameters.
24 System Maintenance From displaying system status to uploading firmware, this menu provides
comprehensive system maintenance.
26 Schedule Setup Use this menu to schedule outgoing calls.
27 VPN /IPSec Setup Use this menu to configure VPN connections.
99 Exit Use this menu to exit (necessary for remote configuration).
3.5 SMT Menu Overview
The following figure gives you an overview of the various SMT menu screens of your Prestige.