beautypg.com

Dynamic dns, 3 dynamic dns – ZyXEL Communications 202H User Manual

Page 50

background image

Prestige 202H User’s Guide

4-2

SMT Menu 1 General Setup

4.3 Dynamic

DNS

Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic DNS
services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You can also access your FTP
server or Web site on your own computer using a DNS-like address (for instance myhost.dhs.org, where
myhost is a name of your choice) that will never change instead of using an IP address that changes each
time you reconnect. Your friends or relatives will always be able to call you even if they don't know your IP
address.

First of all, you need to have registered a dynamic DNS account with www.dyndns.org. This is for people
with a dynamic IP from their ISP or DHCP server that would still like to have a DNS name. The Dynamic
DNS service provider will give you a password or key.

4.3.1 DYNDNS Wildcard

Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same IP address
as yourhost.dyndns.org. This feature is useful if you want to be able to use, for example,
www.yourhost.dyndns.org and still reach your hostname.

If you have a private WAN IP address, then you cannot use Dynamic DNS.

Table 4-1 Menu 1 – General Setup

FIELD DESCRIPTION

EXAMPLE

System Name

Choose a descriptive name, up to 30 alphanumeric characters long (no
spaces, but dashes “–” and underscores "_" are accepted) for
identification purposes. It is recommended you enter your computer’s
“Computer name” (see section 4.1.1) in this field. This name can be
retrieved remotely via SNMP, used for CHAP authentication, and
displayed at the prompt in the Command Mode.

Name

Location
(optional)

Enter the geographic location (up to 31 characters) of your router. branch

Contact Person's
Name (optional)

Enter the name (up to 30 characters) of the person in charge of your
router.

JohnDoe

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.