Xerox 4520 - Manual (Page 83)

P o s t S c r i p t M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-29
PostScript Menu options establish the PostScript
configuration for the printer. PostScript may be used by
software applications to send information and instructions to
the printer.
The 4520mp printer is factory-equipped with PostScript.
PostScript is available as an option for the 4520 printer. See
Appendix D: Ordering Information .
Windows Users:
The Windows PostScript driver for the 4520 allows the user to
either download the PostScript header with every job or
download it only once. If the printer is used in a network or
other shared environment, where both PCL and PostScript
jobs are printed, the header will be deleted when the printer
switches from PostScript to PCL. Banner sheets printed from
Novell networks cause the printer to switch between
PostScript and PCL. If banner sheets are printed, insure that
the Language Sensing option is ON and the default language
is PCL . To avoid the loss of the PostScript header, select
“Download Each Job” in the PostScript driver. The “Already
Downloaded” option may be selected if at least 20 MB of
memory is installed in the printer and the State Saving option
is set to ON in the PostScript printer menu. The user is
required to download the header at least once for each power
on cycle. If several different PostScript applications are used,
the “Download Each Job” option will guarantee that the
correct header is always available.
PostScript
Menu
Note
Note
WUG-CH03 Page 29 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM