Xerox 4520 - Manual (Page 82)

P C L M e n u
3-28 ❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
TrueRes Off
On*
When On , smooths the curves in characters and
graphics to reduce coarseness, thereby improving
image quality.
TrueRes can be overridden by software when the
Xerox printer driver is installed.
State Saving Off*
On
Reserves memory for saving permanently downloaded
fonts and macros, when the printer switches from
using the PCL printer language to using the PostScript
printer language, or when the printer steps down in
Page Protection or Resolution .
When Off , all permanently downloaded fonts and
macros are cleared from memory when switching
PDLs. They must be downloaded again when the
printer switches back to PCL from PostScript.
When On , permanently downloaded fonts and
macros are stored in printer memory. You eliminate
the time to download them again when the printer
switches back to PCL.
Temporary fonts and macros are always
cleared at the end of every print job.
State Saving requires 20 MB of memory if the
PostScript option is installed. If the PostScript option is
not installed,
State Saving may be selected with 16
MB. This will prevent loss of downloaded PCL fonts
and macros if applications change the setting of
Resolution or Page Protection . Enabling State
Saving can have an effect on printing speed with
minimum memory installed. It is recommended that
this option not be enabled without 20 MB of printer
memory. See
“Printer Settings that Affect Memory”
(page 3-69) for further information.
Figure 3.8 PCL Menu options showing factory settings (continued)
Option Setting Description
Note
WUG-CH03 Page 28 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM