Localtalk menu options, Localtalk menu option – Xerox 4520 User Manual
Page 105
I n t e r f a c e M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
❖
3-51
The
LocalTalk Menu
, a submenu of the
Interface Menu
,
Figure 3.11 (page 3-39)
, contains a single option for
configuring the printer’s LocalTalk port, when the LocalTalk
option has been installed.
The LocalTalk option supports AppleTalk protocols. For
detailed information on the supported protocols, refer to
Networking: LocalTalk
packaged with the LocalTalk option.
Figure 3.14 describes the option. The factory setting is
boldfaced
and followed by an asterisk (
*
). See
“Setting a
Menu Option” (page 3-10)
for the steps to find and change
the setting.
Figure 3.14 LocalTalk Menu option showing factory setting
Option
Setting
Description
Port Timeout
5-999 secs (
30*
)
Time interval for determining when to poll the next
port in the polling sequence, after the LocalTalk port
has been inactive for this amount of time.
LocalTalk Menu
Option
WUG-CH03 Page 51 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM