Xerox Phaser 3300MFP - Manual (Page 68)

11.4
If you selected a folder, press the Scroll buttons until the file you
want to delete appears and press Enter.
7 Press Enter when Yes appears to confirm your selection.
8 Press Stop/Clear to return to Standby mode.
Formatting a USB memory device
1 Insert the USB memory device into the USB memory port on your
machine.
2 Press Scan.
3 Press Enter when Scan to USB appears on the bottom line of the
display.
4 Press the Scroll buttons until File Manage appears and press
Enter.
5 Press the Scroll buttons until Format appears and press Enter.
6 Press Enter when Yes appears to confirm your selection.
7 Press Stop/Clear to return to Standby mode.
Viewing the USB memory status
You can check the amount of memory space available for scanning and
saving documents.
1 Insert the USB memory device into the USB memory port on your
machine.
2 Press Scan.
3 Press Enter when Scan to USB appears on the bottom line of the
display.
4 Press the Scroll buttons until Check Space appears and press
Enter.
The available memory space appears on the display.
5 Press Stop/Clear to return to the Standby mode.