Network setup, Introduction, Via network administration programs – Xerox Phaser 3300MFP User Manual
Page 27: Via the control panel, Supported operating systems, Locating the 3300mfp ip address, Accessing centreware internet services (cwis)
4.1
4
Network setup
This chapter gives you step-by-step instructions for setting up your
machine for network connections.
This chapter includes:
•
•
•
Locating the 3300MFP IP Address
•
Accessing CentreWare Internet Services (CWIS)
•
•
•
•
•
Restoring the network configuration
•
Printing a network configuration page
Introduction
Once you have connected your machine to a network with an RJ-45
Ethernet cable, you can share the machine with other network users.
You need to set up the network protocols on the machine to use it as your
network printer. Protocols can be set up by the following two methods:
Via network administration programs
You can configure your machine’s print server settings and manage the
machine via the following programs that came with your machine:
• CentreWare IS: CentreWare Internet Services is the embedded HTTP
server application that resides in the 3300MFP. CentreWare Internet
Services allows administrators to change network and system settings
on the 3300MFP from the convenience of their desktops. The user will
require the 3300MFP IP address to access CWIS. Many of the
features available within CentreWare Internet Services will require an
administrator user name and password. The default user name is
admin and the default password is 1111. A user will only be prompted
for an administrator’s user name and password once in a single
browser session.
This embedded web server allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize e-mail settings and set up Address Book for scanning
to email.
- Customize server settings and set up server lists for scanning to an
FTP or SMB servers.
- Customize printer, copy, and fax settings.
• SetIP: Utility program allowing you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.
See the Software Section.
Via the control panel
You can set up the following basic network parameters through the
machine’s control panel:
• Configure TCP/IP
• Configure EtherTalk
Supported operating systems
The following table shows the network environments supported by the
machine:
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Locating the 3300MFP IP Address
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
2
Press the Scroll buttons until Network Info. appears and press
Enter.
3
Press Enter when Yes appears. The Network Configuration page
prints out.
4
On the Network Configuration page note the IP Address (Example
169.123.21.23)
Accessing CentreWare Internet Services (CWIS)
1
On your PC open a web browser such as Internet Explorer.
Item
Requirements
Network interface
• 10/100 Base-TX
Network operating
system
• Windows 2000/XP/2003/
Vista
• Various Linux OS
• Macintosh OS 10.3 ~ 10.5
Network protocols
• TCP/IP on Windows
• EtherTalk
Dynamic addressing
server
• DHCP, BOOTP