Xerox Phaser 3300MFP - Manual (Page 116)

Using SetIP
12
Using SetIP
1 From the Windows Start menu, select Programs or All
Programs
Æ your printer driver name Æ SetIP Æ SetIP.
The program automatically detects and displays new and
configured print servers on your network.
2 Select the name of your printer and click . If you cannot find
your printer name, click to refresh the list.
N OTES :
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click enter your
network printer card’s Mac address, IP address, subnet mask,
default gateway, and then click Apply.
3 Click OK to confirm the settings.
4
Click Exit to close the SetIP program.