Xerox Phaser 3300MFP - Manual (Page 31)

5.2
To load an original into the ADF:
1 Load the original face up into the ADF. Make sure that the bottom of
the original stack matches the paper size marked on the document
input tray.
2 Adjust the document width guides to the paper size.
Note
Dust on the ADF glass may cause black lines on the printout.
Always keep it clean.
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the
guidelines for use with your machine. Print media that does not meet the
guidelines outlined in this user guide may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
• The type, size and weight of the print media for your machine is
described in following tables.
• Desired outcome: The print media you choose should be appropriate
for your project.
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
Caution
Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not covered
by Xerox’s warranty or service agreements.
Notes
• Some print media may meet all of the guidelines in this section
and still not produce satisfactory results. This may be the result
of improper handling, unacceptable temperature and humidity
levels, or other variables over which Xerox has no control.
• Before purchasing large quantities of print media, ensure that it
meets the requirements specified in this user guide.