Xerox Phaser 3300MFP - Manual (Page 61)

10.1
10
Fax setup
This chapter gives you information on setting up your machine for
receiving and sending faxes.
This chapter includes:
•
Changing the fax setup options
• Changing the default document settings
• Printing sent fax report automatically
• Setting up Phone Book
Changing the fax setup options
Your machine provides you with various user-selectable options for
setting up the fax system. You can change the default settings for your
preferences and needs.
To change the fax setup options:
1 Press Fax.
2 Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
3 Press the Scroll buttons to select Sending or Receiving and press
Enter.
4 Press the Scroll buttons until the menu item you want appears and
press Enter.
5 Press the Scroll buttons until the desired status appears or enter
the value for the option you have selected, and press Enter.
6 If necessary, repeat steps 4 through 5.
7 Press Stop/Clear to return to Standby mode.
Sending options
Option Description
Redial
Times You can specify the number of redial attempts. If you
enter 0, the machine will not redial.
Redial Term Your machine can automatically redial a remote fax
machine if it was busy. You can set an interval
between attempts.
Prefix Dial You can set a prefix of up to five digits. This number
dials before any automatic dial number is started. It is
useful for accessing a PBX exchange.
ECM Mode a This mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any
other ECM-equipped fax machine. Sending a fax
using ECM may take more time.
Receiving options
Sent Report You can set your machine to print a confirmation
report showing whether a transmission was
successful, how many pages were sent, and more.
The available options are On, Off, and On-Error,
which prints only when a transmission is not
successful.
Image TCR b You can prevent the actual faxed material from being
included in the confirmation report for privacy or
security protection.
Dial Mode This setting may not be available depending on your
country. If you cannot reach this option, your machine
does not support this feature.
You can set the dial mode for your machine to either
tone dialing or pulse dialing. If you have a public
telephone system or a private branch exchange
(PBX) system, you may need to select Pulse.
Contact your local telephone company if you are not
sure which dial mode to use.
Note
If you select Pulse, some phone system features
might not be available. It can also take longer to dial
a fax or phone number.
a. Error Correction Mode
b. Transmission Confirmation Report
Option Description
Receive Mode You can select the default fax receiving mode.
For details on receiving faxes in each mode, see
page 9.3.
Ring to Answer You can specify the number of times the machine
rings before answering an incoming call.
Stamp Rcv
Name This option allows the machine to automatically
print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
Rcv Start Code This code allows you to initiate fax reception from
an extension phone plugged into the EXT socket
on the back of the machine. If you pick up the
extension phone and hear fax tones, enter the
code. It is preset to *9* at the factory.
Option Description