USRobotics Instant802 APSDK - Manual (Page 95)

Professional Access Point
Administrator Guide
Ethernet (Wired) Settings - 95
Configuring Guest Interface Ethernet (Wired) Settings
To configure Ethernet (Wired) Settings for the Guest interface, fill in the fields as described below.
Updating Settings
To apply your changes, click Update.
Field Description
MAC Address Shows the MAC address for the Guest interface for the LAN port on this access
point. This is a read-only field.
VLAN ID If you choose to configure Internal and Guest networks by VLANs, this field will be
enabled.
Provide a number between 1 and 4094 for the Guest VLAN. Be sure to assign a dif-
ferent VLAN ID than the one used for the Internal network.
Subnet Shows the subnetwork address for the Guest interface. For example, 192.168.1.0.