Client associations – USRobotics Instant802 APSDK User Manual
Page 83
Professional Access Point
Administrator Guide
Client Associations - 83
This page provides basic information about the current access point and a real-time display of the transmit
and receive statistics for this access point as described in the table below. All transmit and receive
statistics shown are totals accumulated since the access point was last started. If the access point is
rebooted, these figures indicate transmit/receive totals since the reboot.
Client Associations
To view the client stations associated with a particular access point, navigate to the
Status menu’s
Client Associations
on the Web User Interface for the access point that you want to monitor.
Field
Description
IP Address
IP Address for the access point.
MAC Address
Media Access Control (
) address for the specified interface.
The Professional Access Point has a unique MAC address for each interface.
VLAN ID
A VLAN is a software-based, logical grouping of devices on a network that
allow them to act as if they are connected to a single physical network, even
though they may not be.
VLANs can be used to establish internal and guest networks on the same
access point.
Name (SSID)
Wireless network name. Also known as the SSID, this alphanumeric key
uniquely identifies a wireless local area network.
The SSID is set on the Basic Settings tab. (See “Provide Administrator Pass-
word and Wireless Network Name” on page 38.)
Transmit and Receive Information
Total Packets
The total count of packets sent (in the
Transmit
table) or received (in the
Received
table) by this access point.
Total Bytes
The total count of bytes sent (in the
Transmit
table) or received (in the
Received
table) by this access point.
Errors
The total count of errors related to sending and receiving data on this access
point.