USRobotics Instant802 APSDK - Manual (Page 187)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 187
The CLI also includes the following commands for maintenance tasks:
Getting Help on Commands at the CLI
Help on commands can be requested at the command line interface (CLI) by using the TAB key. This is a
quick way to see all valid completions for a class.
Hitting TAB once will attempt to complete the current command.
If multiple completions exist, a beep will sound and no results will be displayed. Enter TAB again to display
all available completions.
• Example 1: At a blank command line, hit TAB twice to get a list of all commands.
USR5453-AP#
add Add an instance to the running configuration
factory-reset Reset the system to factory defaults
get Get field values of the running configuration
reboot Reboot the system
remove Remove instances in the running configuration
save-running Save the running configuration
set Set field values of the running configuration
• Example 2: Type " get " TAB TAB (including a space after get ) to see a list of all field options for the get
command.
USR5453-AP# get
association Associated station
basic-rate Basic rate of the radio
bridge-port Bridge ports of bridge interfaces
bss Basic Service Set of the radio
remove The "remove" command allows you to remove an existing instance of a class.
remove unnamed-class [ field value . . . ]
remove named-class instance | all [ field value . . .]
For example:
remove radius-user wally
save-running The save-running command saves the running configuration as the startup configuration.
For more information, see “ “Saving Configuration Changes” on page 191 .
reboot The reboot command restarts the access point (a soft reboot).
For more information, see “ “Reboot the Access Point” on page 247 .
factory-reset The factory-reset command resets the access point to factory defaults and reboots.
For more information, see “ “Reset the Access Point to Factory Defaults” on page 247 .
Command Description