USRobotics Instant802 APSDK User Manual
Page 180
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 180
Ethernet (Wired) Interface
yes
You can configure all Ethernet (Wired) set-
tings from the CLI except "Connection
Type".
To change the Connection Type from
DHCP to Static IP addressing (or vice
versa), you must use the Web User Inter-
face.
yes
Wireless Interface
yes
yes
Security
yes
yes
Set Up Guest Access
yes
yes
Enable/Configure Guest Login Welcome Page
yes
Configuring Multiple BSSIDs on Virtual Wire-
less Networks
yes
yes
Radio Settings
yes
You can configure all Radio settings from
the CLI except for turning on/off Super G.
yes
MAC Filtering
yes
yes
Load Balancing
yes
yes
Quality of Service
yes
yes
Wireless Distribution System
yes
yes
Time Protocol
yes
yes
Reboot the Access Point
yes
Reset the Access Point to Factory Defaults
yes
yes
Upgrade the Firmware
You cannot upgrade the firmware from the
CLI. To upgrade firmware, use the Web
User Interface as described in
.
yes
Backup and Restore
You cannot backup or restore an access
point configuration from the CLI. To
backup or restore an access point configu-
ration, use the Web User Interface as
described in
yes
Feature or Setting
Configurable from CLI
Configurable
from Web User
Interface