USRobotics Instant802 APSDK - Manual (Page 207)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 207
-----------------------------------------
mac 00:e0:b8:76:28:c0
type AP
privacy Off
ssid domani
channel 6
signal 4
Ethernet (Wired) Interface
This table shows a quick view of commands for getting and setting values for the Wired interface and
provides links to detailed examples.
Note
Before configuring this feature, make sure you are familiar with the names of the interfaces as
described in
“Understanding Interfaces as Presented in the CLI” on page 190 . The interface name you
reference in a command determines whether a setting applies to a wired or wireless interface or to the
Internal or Guest network.
Wired Interface Command Example
Get Summary View of Internal and Guest Interfaces get bss
Get the DNS Name get host id
Set the DNS Name set host id HostName
For example:
set host id vicky-ap
Get Current Settings for the Ethernet (Wired) Internal Interface get interface br0
Get Current Settings for the Ethernet (Wired) Guest Interface get interface brguest
Set Up Guest Access Setting up Guest Access consists of configur-
ing Internal and Guest Wired interfaces on
VLANs.
For detailed examples, see “Set Up Guest
Access” on page 208 .
Find out if Guest Access is enabled and configured. get interface brguest status
(will be "up" or "down")
Get/Change the Connection Type (DHCP or Static IP) See detailed example in “Get/Change the Con-
nection Type (DHCP or Static IP)” on
page 211
.
Re-Configure Static IP Addressing Values For detailed examples see:
“Set the Static IP Address” on page 212
“Set the Static Subnet Mask Address” on
page 212
“Set the Static Subnet Mask Address” on
page 212