USRobotics Instant802 APSDK User Manual
Page 81
Professional Access Point
Administrator Guide
Events - 81
4. Restart the syslog server by typing the following at the command line prompt:
/etc/init.d/sysklogd restart
Enabling and Disabling the Log Relay Host on the Status Menu’s Events Page
To enable and configure log relaying on the Status menu’s
Events
page, set the log relay options as
described below.
Update Settings
To apply your changes, click
Update
.
If you enabled the log relay host, clicking
Update
will activate remote logging. The access point will send its
kernel messages real-time for display to the remote log server monitor, a specified kernel log file, or other
storage, depending on how you configured the log relay host.
If you disabled the log relay host, clicking
Update
will disable remote logging.
No
te
The syslog process will default to use port 514. USRobotics recommends using this default port.
However, if you choose to reconfigure the log port, make sure that the port number that you assign to
syslog is not being used by another process.
Field
Description
Log Relay Host Enabled
Choose to either enable or disable use of the Log Relay Host:
• Enabled
• Disabled
If you select
Enabled
, the
Relay Host
and
Relay Port
fields are editable.
Relay Host
name of the relay host.
Relay Port
Specify the port number for the syslog process on the relay host.
The default port is 514.