Figure 2-7: cut example -20 – Tektronix AFG3000 User Manual

Page 60

Text mode
Original mode

Reference

2-20

AFG3000 Series Arbitrary/Function Generators Reference Manual

Cut (Cut by Data Points). The Cut deletes an area between specified points in the
waveform. When Cut is selected, two values can be input (From X1 and To X2).
See Figure 2-7.

Figure 2-7: Cut example

Read from... Push the front-panel Edit button and then push the Read from... >
Memory bezel menu to load a waveform file from the internal memory or a USB
memory into Edit Memory.

Before executing Cut

After executing Cut

NOTE.

Data that has been deleted cannot be recovered.