Tektronix AFG3000 - Manual (Page 163)

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-89
*SRE
This command sets and queries the bits in the Service Request Enable Register
(SRER).
Group Status
Related Commands *PSC
Syntax *SRE
*SRE?
Arguments ::=
where
is a value in the range from 0 through 255. The binary bits of the SRER are
set according to this value. Using an out-of-range value causes an execution error.
The power-on default for SRER is 0 if *PSC is set to 1. If *PSC is set to 0, the SRER
maintains the previous power cycle value through the current power cycle.
Returns
Examples *SRE 48
sets the bits in the SRER to binary 00110000.
*SRE?
might return 32, showing that the bits in the SRER have the binary value of
00100000.